|
|
|
|
|
How to Program a DirecTV Remote to Control an Xbox 360 |
|
|
|
|
Written by Ed Ballart
|
|
Monday, 22 January 2007 |
|
This is pretty awesome. If you don't have the Xbox remote control, you can use a DirecTV Universal Remote to navigate through the Dashboard and to play DVDs and whatnot in 4 easy steps.
1) Switch the DirecTV remote to AV-1. Point the remote away from your receiver. Press and hold the select and mute buttons until the light above the AV-1 switch blinks twice.
2) Press 991, then press 2. Now press Power.
3) Press Ch. Up 35-40 times, pausing between each press. The light above AV-1 should go on every time you press it.
4) When your Xbox 360 turns on, immediately press Select.
From Instructables.
|
Not working
Written by Guest on 2007-01-23 00:00:00
I tried a couple of times to do this. It didnt work. Im trying it in AV 2 though because my stereo reciever is my AV 1. I wouldnt think this would matter though. | It works
Written by Guest on 2007-01-22 00:00:00
I must say I was shocked but it really works, it took about 56 jumps on the channel thing but it worked. Thanks, been wanting to do that for a very long time! | ANy Chance for Dish Network?
Written by Guest on 2007-01-24 00:00:00
Hey, Does anyone know if there is a hack to use this on a Dish Network Remote? | More pressed than they mention
Written by Guest on 2007-07-15 00:00:00
Like above said it really does work, took me 50+ for it to work though. Make sure you wait 1/2 a second after pressing 991 before you press 2, it seems to do a double flash and will ignore the 2 if you do it too quickly. I have the elite BTW so it loo | works
Written by Guest on 2008-04-16 00:00:00
took me 74 jumps but it does work, i also had to use av-2. |
Powered by AkoComment 2.0! |
|
|
